成功した方法を見つけるだけで、失敗の言い訳をしないでください。GenesysのGE0-703試験に受かるのは実際にそんなに難しいことではないです。大切なのはあなたがどんな方法を使うかということです。JPexamのGenesysのGE0-703試験トレーニング資料はよい選択で、あなたが首尾よく試験に合格することを助けられます。これも成功へのショートカットです。誰もが成功する可能性があって、大切なのは選択することです。
JPexamのIT専門家たちは受験生の皆さんのニーズを満たすように彼らの豊富な知識と経験を活かして試験トレーニング資料の品質をずっと高めています。受験生の皆さんが一回でGenesysのGE0-703試験に合格することを保証します。JPexamの製品を購入したら、あなたはいつでも最新かつ最正確な試験情報を得ることができます。JPexamの資料のカバー率が高くて、受験生に便宜を与えられます。それに、問題集の合格率が１００パーセントに達するのですから、あなたは安心に試験を受けることができます。
試験番号：GE0-703問題集
試験科目：GCP7 - Consultant, Voice Enterprise Edition
最近更新時間：2014-01-23
問題と解答：全100問
100％の返金保証。1年間の無料アップデート。
話と行動の距離はどのぐらいありますか。これは人の心によることです。意志が強い人にとって、行動は目と鼻の先にあるのです。あなたはきっとこのような人でしょう。GenesysのGE0-703認定試験に申し込んだ以上、試験に合格しなければならないです。これもあなたの意志が強いことを表示する方法です。JPexamが提供したトレーニング資料はインターネットで最高のものです。GenesysのGE0-703認定試験に合格したいのなら、JPexamのGenesysのGE0-703試験トレーニング資料を利用してください。
JPexamはGenesysのGE0-703認定試験についてすべて資料を提供するの唯一サイトでございます。受験者はJPexamが提供した資料を利用してGE0-703認証試験は問題にならないだけでなく、高い点数も合格することができます。
GE0-703認定試験は現在で本当に人気がある試験ですね。まだこの試験の認定資格を取っていないあなたも試験を受ける予定があるのでしょうか。確かに、これは困難な試験です。しかし、難しいといっても、高い点数を取って楽に試験に合格できないというわけではないです。では、まだ試験に合格するショートカットがわからないあなたは、受験のテクニックを知りたいですか。今教えてあげますよ。それはJPexamのGE0-703問題集を利用することです。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/GE0-703_exam.html
NO.1 In a Behind the Switch configuration, the VCS carries out instructions from __________.
A. IVR Server only, in the form of IVR ServerXML
B. T-Server only, in the form of TLib Events
C. Web Server, in the form of VoiceXML
D. IVR Server client, in the form of XML
Answer: C
Genesys練習問題 GE0-703認証試験 GE0-703問題集 GE0-703
NO.2 In an In-Front of the Switch configuration using Genesys Framework, __________.
A. the VCS receives all call routing information from the strategy
B. the DNIS must be delivered to the VCS with the call
C. a connection with the IVR Server is required
D. ANI is required to initiate or begin the call.
Answer: B
Genesys参考書 GE0-703認証試験 GE0-703過去問 GE0-703
NO.3 Where is the default location of the DNIS Application Mapping Files?
A. <install dir>\CN\data
B. <install dir>\CN\web\dispenser\spd_data
C. <install dir>\CN\config
D. http://EMPS:9810/spm
Answer: B
Genesys GE0-703 GE0-703認証試験
NO.4 Refer to the CTI Property tab in the Provisioning IVR profile section in the EMPS. The Default Route
Number is used when __________.
A. IVR Server is unable to contact the Solution Control Interface (SCI)
B. IVR Server is unable to contact the Universal Routing Server (URS), or when the URS is unable to
find an agent number to which it can route the call
C. IVR component, specifically Genesys Queue Adapter (GQA), cannot communicate with SCS.
D. IVR Server component cannot communicate with the Web Server
Answer: B
Genesys過去問 GE0-703認定試験 GE0-703問題集 GE0-703 GE0-703練習問題
NO.5 The ability to record the caller's speech for application analysis is configured in an IVR Profile within
the EMPS and is referred to as __________.
A. OA&M
B. EMS Runtime
C. Enable ASR Transcoding
D. Enable ASR Logging
Answer: D
Genesys参考書 GE0-703練習問題 GE0-703問題集 GE0-703認証試験 GE0-703問題集 GE0-703認定資格
NO.6 A logical group of ports is referred to as a __________.
A. Telephony Manager
B. Route
C. Page Collector
D. MRCP Client
Answer: B
Genesys GE0-703過去問 GE0-703認証試験 GE0-703参考書
NO.7 The process on the VCS/IPCS that starts the other component processes is the __________.
A. Page Collector
B. IVR Server Client
C. Call Flow Assistant
D. WatchDog
Answer: D
Genesys認定証 GE0-703認証試験 GE0-703 GE0-703認定資格
NO.8 Which VCS/IPCS component controls the TDM telephony or IP Telephony interfaces?
A. PopGateway
B. Page Collector
C. MRCP Client
D. Net Management
Answer: A
Genesys GE0-703問題集 GE0-703 GE0-703問題集
NO.9 To bring up the 9810 listener window in EMPS you need to expand Server, CORE, click on
<ServerName> and then follow which links?
A. Right-click on the Server and view
B. Click link for Network Management GUI to open the 9810 listener
C. Click the link for Server Explorer to open the 9810 listener
D. There are no available links for the 9810 listener window in the EMPS.
Answer: B
Genesys GE0-703 GE0-703過去問 GE0-703認証試験 GE0-703認定証
NO.10 In the <Application_Name>.xml file, the IVRTimeout value determines __________.
A. how long URS waits for the response from web server before timing out and trying default routing
target.
B. how long VCS/IPCS waits for the response from web server before timing out and attempting to reach
the Backup IVR URL.
C. how long GQA waits for the connection with the IVR Server before using the Backup IVR URL.
D. how long VCS/IPCS waits for the response from web server before timing out and attempting to reach
the Primary IVR URL.
Answer: B
Genesys GE0-703参考書 GE0-703問題集 GE0-703
NO.11 The Internet Protocol Communication Server (IPCS) processes __________ calls.
A. SIP
B. HTML
C. TDM
D. EMPS
Answer: A
Genesys GE0-703 GE0-703認定資格 GE0-703参考書
NO.12 When would you use the Import Server Instance CSV feature in EMPS?
A. Never. This feature is not available through the EMPS
B. Any time you want to make a change to any of the parameters in EMPS
C. You want to start the Watchdog service
D. When numerous changes are needed with servers or configuration of various components for a
server and in conjunction with Genesys Technical Support
Answer: D
Genesys GE0-703 GE0-703 GE0-703
NO.13 When the parameter localconfig is set equal to 1 (localconfig = 1) in GVP.ini, the WatchDog service
will __________.
A. not read the local GVP.ini file, using the latest configuration contained in the LDAP database for the
VCS/IPCS parameter settings
B. read the local GVP.ini file for the VCS/IPCS parameters, not using use the latest configuration
contained in the LDAP database.
C. read the local watchdog.ini file for the VCS/IPCS parameters, not using use the latest configuration
contained in the LDAP database.
D. read the local EMPS.ini file for the VCS/IPCS parameters, not using use the latest configuration
contained in the LDAP database.
Answer: B
Genesys GE0-703 GE0-703 GE0-703 GE0-703
NO.14 The GVP VoiceXML application logic resides on __________.
A. a web server
B. the VCS
C. the VPM
D. the IPCM
Answer: A
Genesys GE0-703問題集 GE0-703認定試験 GE0-703 GE0-703
NO.15 Which GVP application is used to build and test voice applications?
A. Element Management Provisioning System
B. IP Call Manager
C. Voice Application Reporter
D. Genesys Studio
Answer: D
Genesys GE0-703 GE0-703
NO.16 Which of the following features can be changed using the Element Management System (EMS) GUI
when monitoring a VCS?
A. the log level for each process
B. the default directory for logging
C. the Behind or In-Front configuration for that particular VCS
D. the speech recognition vendor for that particular VCS
Answer: A
Genesys GE0-703認定証 GE0-703 GE0-703 GE0-703 GE0-703
NO.17 How are VoiceXML pages produced during a GVP call session?
A. Web application server generates VoiceXML when processing asp or jsp pages
B. VCS or IPCS produce VoiceXML when the call is initiated
C. EMPS produces VoiceXML when the request comes in
D. IPCS creates the VoiceXML when it relays SIP messages
Answer: A
Genesys問題集 GE0-703認定証 GE0-703
NO.18 The Internet Protocol Communication Server (IPCS) processes __________ calls.
A. SIP
B. HTML
C. TDM
D. EMPS
Answer: A
Genesys GE0-703認定試験 GE0-703認定試験 GE0-703
NO.19 A Primary Voice Application URL is required when provisioning the IVR Profile. The Primary Voice
Application CANNOT include __________.
A. the fully qualified name of the web server that hosts the application
B. the numeric IP address of the web server that hosts the application
C. the name of the first page of the voice application
D. the path to the <Application Name>.XML file
Answer: D
Genesys認定試験 GE0-703 GE0-703 GE0-703過去問 GE0-703
NO.20 Under what circumstances is a username and password required to access the EMPS?
A. Never. By default, a username and password is not required since EMPS is only used for monitoring
purposes.
B. Always. When opening EMPS Login screen, the system will require users enter their username and
password.
C. Only when the EMPS is being accessed from a remote workstation. You are automatically
authenticated and can log in from a local machine.
D. Only when using SunOne Directory Server because OpenLDAP has no built-in security for the EMPS
login screen.
Answer: B
Genesys GE0-703認定証 GE0-703認定資格
NO.21 Which version of the VoiceXML Specification does GVP version 7.5 support?
A. VoiceXML 1.0
B. VoiceXML 1.1
C. VoiceXML 2.0
D. VoiceXML 3.0
Answer: C
Genesys認定資格 GE0-703認定資格 GE0-703認定試験
NO.22 Which GVP software component is used to configure the various components of GVP including
application provisioning?
A. Element Management Provisioning System
B. IP Call Manager
C. Voice Application Reporter
D. Genesys Studio
Answer: A
Genesys GE0-703 GE0-703 GE0-703 GE0-703 GE0-703参考書
NO.23 Which of the following are Windows prerequisites for VCS?
A. there are no Windows prerequisites
B. Active Directory
C. IIS and SNMP
D. SQL Server
Answer: C
Genesys参考書 GE0-703認定試験 GE0-703
NO.24 The <Application_Name>.xml files provides all of the __________.
A. VCS configuration information
B. voice application information
C. IPCS configuration information
D. web server configuration information
Answer: B
Genesys GE0-703問題集 GE0-703過去問 GE0-703認定証
NO.25 The Voice Communication Server (VCS) processes __________ calls.
A. VoIP
B. IPCS
C. Web-based GUI
D. TDM
Answer: D
Genesys GE0-703 GE0-703 GE0-703参考書
NO.26 The DNIS.xml provides __________.
A. the Primary Application URL
B. all application configuration information but no process information
C. the address of the IVR Server
D. the URL path to the <Application_Name>.XML
Answer: D
Genesys GE0-703 GE0-703
NO.27 For most deployments with VCS configured in Behind-the-Switch mode using Genesys Framework,
DNIS is obtained through what mechanism?
A. VCS request to the T-Server via IVR Server
B. VCS requests to the Dialogic telephony board
C. a route point corresponding to the appropriate strategy
D. VCS request directly to the ACD/PBX
Answer: A
Genesys GE0-703認定試験 GE0-703
NO.28 The <DNIS>.XML and <Application_Name>.xml files are generated when __________.
A. a call arrives at the VCS
B. an application is created and configured in EMPS
C. the WatchDog on the EMPS is restarted
D. requested by the IVR Server
Answer: B
Genesys GE0-703参考書 GE0-703 GE0-703 GE0-703 GE0-703練習問題
NO.29 After WatchDog is started, GVP.ini file contains __________.
A. no configuration information for VCS/IPCS processes
B. application specific configuration information such as DNIS
C. the configuration information for VCS/IPCS processes, such as default log levels
D. only Dialogic configuration information
Answer: C
Genesys認定資格 GE0-703 GE0-703認証試験 GE0-703認定試験
NO.30 When you make a change to a parameter, such as PopGateway, Route1, Route Type - from InBound
to OutBound, what needs to happen for this change to go into effect?
A. restart WatchDog
B. no need to restart anything. New parameter value goes into effect immediately
C. restart the EMPS
D. restart MRCP Server
Answer: A
Genesys認定試験 GE0-703 GE0-703認定試験
JPexamは最新のFCNSA.v5問題集と高品質のMSC-235問題と回答を提供します。JPexamのMB7-701 VCEテストエンジンと00M-503試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の000-456 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论