人生にはあまりにも多くの変化および未知の誘惑がありますから、まだ若いときに自分自身のために強固な基盤を築くべきです。あなた準備しましたか。JPexamのJuniperのJN0-101 JN0-360 JN0-343 JN0-331 JN0-522試験トレーニング資料は最高のトレーニング資料です。IT職員としてのあなたは切迫感を感じましたか。JPexamを選んだら、成功への扉を開きます。頑張ってください。
JPexamは多種なIT認証試験を受ける方を正確な資料を提供者でございます。弊社の無料なサンプルを遠慮なくダウンロードしてください。
JPexamは１００％の合格率を保証するだけでなく、1年間の無料なオンラインの更新を提供しております。最新の資源と最新の動態が第一時間にお客様に知らせいたします。何の問題があったらお気軽に聞いてください。
なぜ受験生はほとんどJPexamを選んだのですか。JPexamは実践の検査に合格したもので、JPexamの広がりがみんなに大きな利便性と適用性をもたらしたからです。JPexamが提供したJuniperのJN0-101 JN0-360 JN0-343 JN0-331 JN0-522試験資料はみんなに知られているものですから、試験に受かる自信がないあなたはJPexamのJuniperのJN0-101 JN0-360 JN0-343 JN0-331 JN0-522試験トレーニング資料を利用しなければならないですよ。JPexamを利用したら、あなたはぜひ自信に満ちているようになり、これこそは試験の準備をするということを感じます。
試験番号：JN0-101問題集
試験科目：JNCIA-JUNOS EXAM OBJECTIVES
最近更新時間：2014-03-13
問題と解答：全190問
100％の返金保証。1年間の無料アップデート。
試験番号：JN0-360問題集
試験科目：Juniper Networks Certified Internet Specialist (JNCIS-SP)
最近更新時間：2014-03-13
問題と解答：全252問
100％の返金保証。1年間の無料アップデート。
試験番号：JN0-343問題集
試験科目：Juniper Networks Certified Internet Specialist (JNCIS-ENT)
最近更新時間：2014-03-13
問題と解答：全393問
100％の返金保証。1年間の無料アップデート。
試験番号：JN0-331問題集
試験科目：SEC,Specialist(JNCIS-SEC)
最近更新時間：2014-03-13
問題と解答：全131問
100％の返金保証。1年間の無料アップデート。
試験番号：JN0-522問題集
試験科目：FXV,Associate (JNCIA-FWV)
最近更新時間：2014-03-13
問題と解答：全160問
100％の返金保証。1年間の無料アップデート。
現在のネットワークの全盛期で、JuniperのJN0-101 JN0-360 JN0-343 JN0-331 JN0-522の認証試験を準備するのにいろいろな方法があります。JPexamが提供した最も依頼できるトレーニングの問題と解答はあなたが気楽にJuniperのJN0-101 JN0-360 JN0-343 JN0-331 JN0-522の認証試験を受かることに助けを差し上げます。JPexamにJuniperのJN0-101 JN0-360 JN0-343 JN0-331 JN0-522の試験に関する問題はいくつかの種類がありますから、すべてのIT認証試験の要求を満たすことができます。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/JN0-343_exam.html
NO.1 Which OSPF area type can contain Type 7 LSAs?
A. backbone
B. not-so-stubby
C. stub
D. totally stubby
Answer: B
Juniper認定証 JN0-343 JN0-343 JN0-343 JN0-343認定資格 JN0-343
NO.2 What is the correct sequence of OSPF adjacency formation?
A. Down, Init, ExStart, 2way, Loading, Exchange, Full
B. Down, 2way, Init, ExStart, Exchange, Loading, Full
C. Down, Init, 2way, ExStart, Exchange, Loading, Full
D. Down, Init, 2way, Loading, ExStart, Exchange, Full
Answer: C
Juniper練習問題 JN0-343練習問題 JN0-343 JN0-343練習問題
NO.3 Which two pieces of information are communicated by IS-IS TLVs? (Choose two.)
A. network protocols supported
B. designated router priority
C. authentication key
D. PDU Length
Answer: A,C
Juniper認定証 JN0-343認定試験 JN0-343 JN0-343認証試験
NO.4 Which statement describes the default Junos OS behavior for OSPF?
A. External LSAs are advertised in a stub area.
B. An ABR does not announce a default route into a stub area.
C. Stub area internal routers generate a default route.
D. Only totally stubby areas need a default route.
Answer: B
Juniper JN0-343 JN0-343 JN0-343認定証 JN0-343
NO.5 Which protocol is an IGP?
A. LACP
B. STP
C. OSPF
D. PAGP
Answer: B
Juniper JN0-343過去問 JN0-343
NO.6 What is the default behavior of a trunk port when it receives transit traffic without a VLAN tag?
A. It drops the traffic.
B. It forwards the traffic.
C. It tags the transit traffic with lowest VLAN ID permitted on the trunk.
D. It tags the transit traffic with highest VLAN ID permitted on the trunk.
Answer: A
Juniper JN0-343 JN0-343 JN0-343 JN0-343過去問
NO.7 What are two valid BPDU types? (Choose two.)
A. topology change notification
B. configuration change
C. configuration
D. root bridge
Answer: A,C
Juniper JN0-343 JN0-343認証試験 JN0-343
NO.8 Which Junos command correctly configures the ge-0/0/0.0 interface to operate only for IS-IS Level 2?
A. set interfaces ge-0/0/0.0 family iso level 2 enable
B. set interfaces ge-0/0/0.0 family iso level 1 disable
C. set protocols isis interface ge-0/0/0.0 level 2 enable
D. set protocols isis interface ge-0/0/0.0 level 1 disable
Answer: D
Juniper参考書 JN0-343 JN0-343 JN0-343
NO.9 Which OSPF LSA type is sent by all routers in an area to advertise its connected subnets?
A. router
B. network
C. external
D. summary
Answer: A
Juniper認証試験 JN0-343 JN0-343認証試験 JN0-343
NO.10 Which command correctly assigns AS 65432 as the local router's autonomous system?
A. set protocols bgp local-as 65432
B. set routing-options local-as 65432
C. set protocols bgp autonomous-system 65432
D. set routing-options autonomous-system 65432
Answer: D
Juniper練習問題 JN0-343 JN0-343問題集 JN0-343
NO.11 Which configuration disables a port when more than 30,000 Kbps of broadcast traffic is received over
an aggregated Ethernet interface with two member links?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: C
Juniper JN0-343問題集 JN0-343 JN0-343認定証
NO.12 Which BGP attributes are listed in the correct route selection order?
A. local preference, AS path, origin, MED
B. local preference, MED, AS path, origin
C. AS path, local preference, origin, MED
D. MED, origin, local preference, AS path
Answer: A
Juniper参考書 JN0-343 JN0-343 JN0-343 JN0-343
NO.13 Which configuration correctly sets interface ge-0/0/4 in trunk mode, carrying VLANs v10 and v20?
A. ge-0/0/4 {
unit 0 {
family ethernet-switching {
vlan {
members [ v10 v20 ];
}
} } }
B. ge-0/0/4 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members [ v10 v20 ];
}
}
}
}
C. ge-0/0/4 {
vlan-tagging;
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members [ v10 v20 ];
}
}
}
}
D. ge-0/0/4 {
unit 10 {
family ethernet-switching;
}
unit 20 {
family ethernet-switching;
}
}
Answer: B
Juniper参考書 JN0-343 JN0-343 JN0-343
NO.14 In the following output, what does the asterisk indicate?
A. The interface is configured as a trunk.
B. The interface is configured for spanning-tree protocol.
C. The interface is active.
D. The interface is inactive.
Answer: C
Juniper JN0-343問題集 JN0-343認定試験 JN0-343 JN0-343
NO.15 Configuring bpdu-timeout-action enables which protection mechanism?
A. root protection
B. BPDU protection
C. loop protection
D. RSTP protection
Answer: C
Juniper JN0-343認定資格 JN0-343 JN0-343
NO.16 When processing inbound Ethernet frames, which firewall filter is evaluated first by an EX Series
switch?
A. port filter
B. VLAN filter
C. trunk filter
D. route filter
Answer: A
Juniper過去問 JN0-343 JN0-343 JN0-343 JN0-343
NO.17 When loop protection is enabled on an interface, what happens when the port stops receiving BPDUs?
A. The port is placed in a loop-inconsistent role.
B. The port is placed into listening mode.
C. The port is transitioned into a forwarding state.
D. The interface is disabled.
Answer: A
Juniper参考書 JN0-343 JN0-343 JN0-343練習問題
NO.18 Given the following output, what has been configured for the 192.168.3.0/24 prefix?
A. per-flow load balancing
B. a floating static route
C. per-packet load balancing
D. a qualified next hop
Answer: A
Juniper認証試験 JN0-343 JN0-343練習問題 JN0-343 JN0-343問題集
NO.19 Which two OSPF LSA types can be used to advertise routes between areas? (Choose two.)
A. router
B. network
C. external
D. summary
Answer: C,D
Juniper認証試験 JN0-343問題集 JN0-343認証試験 JN0-343認定資格
NO.20 How much overhead does the GRE header add to an IPv4 packet?
A. 24 bytes
B. 32 bytes
C. 48 bytes
D. 64 bytes
Answer: A
Juniper認定試験 JN0-343過去問 JN0-343
NO.21 Which of the following can be used for both security and loop prevention?
A. firewall filters
B. DHCP snooping
C. dynamic ARP inspection D. MAC move limiting
Answer: D
Juniper過去問 JN0-343 JN0-343 JN0-343
NO.22 Which of the following is enabled by default on an EX Series switch?
A. MAC move limiting
B. storm control
C. IP source guard
D. dynamic ARP inspection
Answer: B
Juniper JN0-343認定資格 JN0-343認定証 JN0-343練習問題
NO.23 Which configuration summarizes external routes in the 172.16.0.0/22 range into a single prefix on an
ABR for Area 1?
A. protocols { ospf { area 0.0.0.1 {
nssa {
default-lsa {
default-metric 1;
metric-type 1;
}
}
area-range 172.16.0.0/22;
}
}
}
B. protocols {
ospf {
area 0.0.0.1 {
nssa {
area-range 172.16.0.0/22;
}
}
}
}
C. protocols {
ospf {
area 0.0.0.1 {
stub summaries;
}
}
}
D. protocols {
ospf {
area 0.0.0.1 {
nssa;
area-range 172.16.0.0/22 restrict;
}
}
}
Answer: B
Juniper認定資格 JN0-343 JN0-343認定資格
NO.24 An administrator finds that traffic from a large file download over an HTTP session is not load-balanced
across multiple links in a LAG. What is the possible cause?
A. Per-packet load-balancing is not configured.
B. The redundant path has a different IGP metric.
C. The hash key is not configured in the forwarding-options stanza.
D. This is the expected behavior.
Answer: D
Juniper JN0-343問題集 JN0-343認定証
NO.25 Which two of the following are functions of the BGP update message? (Choose two.)
A. It withdraws routes that are no longer valid.
B. It notes that an unsupported option is detected from the open message.
C. It transports routing information between BGP peers.
D. It readvertises routes that have already been sent and acknowledged.
Answer: A,C
Juniper JN0-343 JN0-343 JN0-343
NO.26 Which routing-instance type allows the sharing of interface routes and the support features used in
source-based routing?
A. virtual-router
B. vrf
C. forwarding
D. multi-instance
Answer: C
Juniper認定証 JN0-343 JN0-343 JN0-343過去問
NO.27 What is the minimum configuration necessary to create two VLANs and two operational RVIs?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: B
Juniper JN0-343認定証 JN0-343 JN0-343問題集 JN0-343練習問題
NO.28 Click the Exhibit button.
Based on the exhibit, in which spanning-tree state would the indicated port be.?
A. listening
B. learning
C. forwarding
D. blocking
Answer: C
Juniper JN0-343 JN0-343 JN0-343
NO.29 Which statements are true about graceful Routing Engines switchover (GRES)?
A. Configuration on both Routing Engines must be synchronized.
B. The backup Routing Engine cannot be managed through IP address because RPD does not run on
backup the Routing Engine.
C. Different hostnames must be configured on both Routing-Engines.
D. Both Routing-Engines are managed through a single out-of-band-management IP address.
Answer: A
Juniper JN0-343 JN0-343問題集 JN0-343認証試験
NO.30 Which three statements correctly describe the default BGP advertisement behavior in the Junos OS?
(Choose three.)
A. Routes learned through EBGP are advertised to IBGP peers.
B. Routes learned through EBGP are advertised to other EBGP peers.
C. Routes learned through IBGP are advertised to other IBGP peers.
D. Routes learned through IBGP will be advertised to EBGP peers.
E. Routes learned through an IGP are automatically advertised to EBGP peers.
Answer: A,B,D
Juniper認定試験 JN0-343 JN0-343 JN0-343過去問
没有评论:
发表评论