人生には様々な選択があります。選択は必ずしも絶対な幸福をもたらさないかもしれませんが、あなたに変化のチャンスを与えます。JPexamのIBMのA2090-737試験トレーニング資料はIT職員としてのあなたがIT試験に受かる不可欠なトレーニング資料です。JPexamのIBMのA2090-737試験トレーニング資料はカバー率が高くて、更新のスピードも速くて、完全なトレーニング資料ですから、JPexam を手に入れたら、全てのIT認証が恐くなくなります。
JPexamのA2090-737問題集はあなたが信じられないほどの的中率を持っています。この問題集は実際試験に出る可能性があるすべての問題を含んでいます。したがって、この問題集をまじめに勉強する限り、試験に合格することが朝飯前のことになることができます。IBM試験の重要なの一環として、A2090-737認定試験はあなたに大きな恩恵を与えることができます。ですから、あなたを楽に試験に合格させる機会を逃してはいけません。JPexamは試験に失敗した場合は全額返金を約束しますから、A2090-737試験に合格することができるように、はやくJPexamのウェブサイトに行ってもっと詳細な情報を読んでください。
JPexamのIBMのA2090-737試験トレーニング資料は現在で一番人気があるダウンロードのフォーマットを提供します。PDFとソフトのフォーマットで、ダウンロードするのは易いです。JPexamが提供した製品がIT専門家は実際の経験を活かして作った最も良い製品で、あなたが自分の目標を達成するようにずっと一生懸命頑張っています。
Pass4Tesを通じて最新のIBMのA2090-737試験の問題と解答早めにを持てて、弊社の問題集があればきっと君の強い力になります。
JPexamはIBMのA2090-737認定試験に関する包括的な資料を提供します。当社のトレーニング資料は専門家が研究した最新の研究資料です。JPexamを利用したら、あなたはいつでも最新の問題集と解答を持つことができます。当社のトレーニングツールは定期的に更新しますから、常に変わっている試験の目標に従っています。実際には成功は遠くないです。JPexamが与えた道に沿って、あなたの成功への独自の道に行くことができるようになります
試験番号：A2090-737問題集
試験科目：Assessment: DB2 9 System Administrator for z/OS-Assessment
最近更新時間：2014-04-03
問題と解答：全102問
100％の返金保証。1年間の無料アップデート。
JPexamはその近道を提供し、君の多くの時間と労力も節約します。JPexamはIBMのA2090-737認定試験に向けてもっともよい問題集を研究しています。もしほかのホームページに弊社みたいな問題集を見れば、あとでみ続けて、弊社の商品を盗作することとよくわかります。ass4Testが提供した資料は最も全面的で、しかも更新の最も速いです。
JPexamは多くの人に便利を与えるとともに、多くの人の夢が実現させるサイトでございます。もし君はまだIT試験で心配すれば、私達JPexamの問題集を選んでください。JPexamは長年の研究をわたって研ITの認証試験に関する品質が高く、範囲は広い教育資料が開発しました。それは確かに君の試験に役に立つとみられます。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/A2090-737_exam.html
NO.1 You are planning the migration of your DB2 subsystem from version 8 to version 9.
Rebinding existing
packages is highly recommended, but you are also worrying about potential problems that
might occur
with new access paths after rebind. Which action gives you the option to rebind packages
with the ability
to fall back to the original access path if performance problems are encountered?
A.Use REBIND PACKAGE option PLANMGMT(BASIC) or (EXTENDED).
B.Use REBIND PACKAGE option REOPT(ONCE).
C.Use REBIND PACKAGE option OPTHINT.
D.Use REBIND PACKAGE option KEEPDYNAMIC(YES).
Answer:A
IBM認定証 A2090-737過去問 A2090-737 A2090-737 A2090-737認定試験
NO.2 DSNDB06.SYSPLAN runs out of space. Which steps should be performed to resolve
the situation?
A.1) COPY DSNDB06.SYSPLAN. 2) Stop DSNDB06.SYSPLAN. 3) Delete
DSNDB06.SYSPLAN VSAM
data set. 4) Define DSNDB06.SYSPLAN VSAM data set with more space. 5) Start
DSNDB06.SYSPLAN.
6) RECOVER DSNDB06.SYSPLAN.
B.1) UNLOAD DSNDB06.SYSPLAN. 2) Stop DSNDB06.SYSPLAN. 3) Delete
DSNDB06.SYSPLAN
VSAM data set. 4) Define DSNDB06.SYSPLAN VSAM data set with more space. 5) Start
DSNDB06.SYSPLAN. 6) LOAD DSNDB06.SYSPLAN.
C.1) UNLOAD DSNDB06.SYSPLAN. 2) ALTER PRIQTY to a larger value. 3) LOAD
REPLACE
DSNDB06.SYSCOPY.
D.1) REORG UNLOAD SHRLEVEL REFERENCE DSNDB06.SYSPLAN. 2) Stop
DSNDB06.SYSPLAN. 3)
Delete DSNDB06.SYSPLAN VSAM data set. 4) Define DSNDB06.SYSPLAN VSAM data set
with more
space. 5) Start DSNDB06.SYSPLAN. 6) REORG RESUME DSNDB06.SYSPLAN.
Answer:A
IBM認定証 A2090-737参考書 A2090-737
NO.3 A number of jobs are waiting for an allied connection to access a DB2 subsystem.
What should be
done to increase the number of allied connections that can be allocated concurrently?
A.Increase the value of MAXDBAT.
B.Increase the value of CTHREAD.
C.Increase the value of MAXKEEPD.
D.Increase the value of MAXDS.
Answer:B
IBM A2090-737過去問 A2090-737 A2090-737
NO.4 A number of jobs are waiting for an allied connection to access a DB2 subsystem.
What should be
done to increase the number of allied connections that can be allocated concurrently?
A.Increase the value of MAXDBAT.
B.Increase the value of CTHREAD.
C.Increase the value of MAXKEEPD.
D.Increase the value of MAXDS.
Answer:B
IBM問題集 A2090-737認定証 A2090-737 A2090-737認定試験 A2090-737練習問題
NO.5 Within which two DB2 address spaces may the execution of a DB2 stored procedure
occur? (Choose
two.)
A.Workload Manager SPAS
B.Database Services (DBM1)
C.DB2-established SPAS
D.Distributed Data Facility (DDF)
E.System Services (MSTR)
Answer:A B
IBM A2090-737認定証 A2090-737
NO.6 What is a benefit of using the in-memory work file in DB2 9?
A.Improves performance using TEMP database.
B.Avoids I/Os for the declared global temporary tables.
C.Improves performance for small sorts.
D.Sorts a large number of rows faster.
Answer:C
IBM認定証 A2090-737 A2090-737過去問 A2090-737
NO.7 You are migrating your DB2 subsystem from version 8 to DB2 9. You have already
used the
user-defined RTS tables in version 8 and you are planning to also use RTS in version 9.
Which two
statements are true? (Choose two.)
A.DSNRTSDB is integrated into the DB2 9 catalog.
B.The existing the real-time statistics data is copied from your user-defined tables to catalog
tables as part
of the migration to CM.
C.You can safely drop your user-defined RTS database once you are in ENFM.
D.You should keep your user-defined RTS database until you have fully migrated to NFM.
E.Execute DDL in member DSNTESS in SDSNSAMP to create the RTS database.
Answer:A C
IBM A2090-737 A2090-737 A2090-737過去問
NO.8 By examining a DB2 accounting report, how can you determine if DASD I/O contention
is a factor in a
poor performing application?
A.Divide the number of get pages by the number of synchronous I/Os.
B.Divide the synchronous I/O wait time by the number of synchronous I/Os.
C.Divide the asynchronous I/O wait time by the number of synchronous I/Os.
D.Divide the class 2 elapsed time by the number of synchronous I/Os.
Answer:B
IBM過去問 A2090-737認証試験 A2090-737認定資格
NO.9 Which two accounting trace classes must be active when tracing package and DBRM
related activity?
(Choose two.)
A.class 1
B.class 2
C.class 3
D.class 5
E.class 7
Answer:A E
IBM A2090-737認定証 A2090-737認定試験 A2090-737問題集
NO.10 Which privilege is required to use the ACCESS command?
A.DISPLAY
B.STARTDB
C.MONITOR
D.ACCESSDB
Answer:B
IBM認定証 A2090-737練習問題 A2090-737参考書 A2090-737 A2090-737練習問題
NO.11 Which statement is true regarding disaster recovery scenarios?
A.When using the RESTORE SYSTEM utility, each DB2 member must use the same
SYSPITR value
when creating conditional restart control records (CRCR).
B.When using an advanced disk mirroring solution, a conditional restart of DB2 must still be
performed at
the disaster site.
C.With a synchronous peer to peer replication solution, a group restart is not required for a
data sharing
group since everything is synchronously mirrored.
D.A backup taken from the BACKUP SYSTEM utility cannot be used for object level recovery
for the
catalog/directory during a disaster recovery scenario.
Answer:A
IBM A2090-737認証試験 A2090-737認定資格 A2090-737
NO.12 A user job runs a very long time without commit and then the application abends. The
job updated a
critical table that is used by many applications. The back out is taking a long time. Which
statement
describes the appropriate action to take?
A.Cancel the DB2 system since this is a critical resource that is needed by many
applications.
B.Issue the -CANCEL THREAD(token) NOBACKOUT.
C.Let DB2 continue with the back out.
D.Restart the system using the LBACKOUT=AUTO system parameter.
Answer:C
IBM A2090-737 A2090-737 A2090-737参考書
NO.13 There is a suspected problem with catalog table space DSNDB06.SYSDBASE.
Should a problem be
discovered, which series of tasks could you run to analyze and resolve the problem?
A.Run DSN1CHKR against DSNDB06.SYSDBASE; run REPAIR DSNDB06.SYSDBASE as
necessary.
B.STOP DSNDB06.SYSDBASE; run REPAIR DBD against DSNDB06.SYSDBASE as
necessary.
C.START DSNDB06.SYSDBASE ACCESS(UT); run DSN1CHKR against
DSNDB06.SYSDBASE; run
REPAIR DSNDB06.SYSDBASE as necessary, START DSNDB06.SYSDBASE
ACCESS(RW).
D.STOP DSNDB06.SYSDBASE; run CHECK DATA to validate RI constraints; run
DSN1CHKR
DSNDB06.SYSDBASE; run REPAIR DSNDB06.SYSDBASE as necessary, START
DSNDB06.SYSDBASE.
Answer:C
IBM問題集 A2090-737過去問 A2090-737 A2090-737認定資格
NO.14 Which two actions must be performed for a data sharing traditional image copy
disaster recovery?
(Choose two.)
A.Use STARTRBA=ENDRBA for the conditional restart control record.
B.Start DB2 using the LIGHT(YES) keyword.
C.Use DEFER=ALL in the system parameters during the first restart.
D.Modify the IRLM start up proc to specify SCOPE=LOCAL.
E.Use the SETXCF FORCE command to delete DB2 CF structures.
Answer:C E
IBM過去問 A2090-737過去問 A2090-737 A2090-737過去問
NO.15 Which two methods can be used to configure the use of a SSL secure port on a DB2
for z/OS server?
(Choose two.)
A.Specify "Y" in the SECURE column of SYSIBM.SYSLOCATIONS.
B.Specify a secure port value in the PORT column of SYSIBM.SYSLOCATIONS.
C.Update the DDF statement in the BSDS using DSNJU003.
D.Specify the TCP/IP port number in the DRDA SECURE PORT field of the Distributed Data
Facility Panel
2 (DSNTIP5).
E.Specify the value of the secure port in the DRDA PORT field of DSNTIP5.
Answer:C D
IBM A2090-737認証試験 A2090-737 A2090-737 A2090-737
NO.16 Which three statements are correct for automatic management of buffer pool storage in
DB2 9?
(Choose three.)
A.You do not need to ALTER BUFFERPOOL with AUTOSIZE(YES) to enable this
functionality.
B.DB2 provides sizing information to WLM.
C.DB2 communicates to WLM each time allied agents encounter delays due to read I/O.
D.DB2 periodically reports BPOOL size and random read hit ratios to WLM.
E.The automatic altered buffer pool sizes are resized to the original with the recycle of the
DB2
sub-system.
Answer:B C D
IBM A2090-737認定資格 A2090-737 A2090-737参考書
NO.17 An accounting report shows high class 3 times. Which three could contribute to the
class 3 times?
(Choose three.)
A.elapsed time
B.not accounted time
C.page latch
D.service task switch
E.synchronous I/O
Answer:C D E
IBM A2090-737 A2090-737認定試験 A2090-737練習問題
NO.18 Your administrative scheduler shows message DSNA679I indicating that one or both
copies of your
task lists is not accessible or is corrupted. Your analysis shows that only the VSAM file is
corrupt, but the
ADMIN_TASKS table is still operational. Which statement describes how to correct this
situation?
A.Create an empty version of the VSAM task list and let DB2 perform an autonomic recovery
using the
content of the ADMIN_TASKS table.
B.Create an empty version of the VSAM task list and use REPRO utility to copy the contents
of the VSAM
cluster containing the ADMIN_TASKS table.
C.Create an empty version of the VSAM task list and use DB2 command -RECOVER
TASKLIST to
recover the content of the ADMIN_TASKS table.
D.No manual interaction is needed as long as the ADMIN_TASKS table is still accessible.
Answer:A
IBM参考書 A2090-737認定資格 A2090-737練習問題 A2090-737過去問 A2090-737認定証
NO.19 An accounting trace shows a high get page per SQL ratio for a query which retrieves
just one row each
time it is executed. Which two situations could account for the high ratio? (Choose two.)
A.Use of a matching unique index scan.
B.Use of a nonmatching index scan.
C.Use of an index with low cardinality.
D.Use of an index with high cardinality.
E.Use of a single column index that is a GENERATED ALWAYS identity column.
Answer:B C
IBM A2090-737認定証 A2090-737 A2090-737 A2090-737参考書 A2090-737認定資格
NO.20 Which two statements regarding system parameters are true? (Choose two.)
A.Indexes can now be mapped to 8K and 16K buffer pools assigned by default using the
system
parameter IDXBPOOL.
B.Implicit table space data sets are always defined at create time without a system parameter
to override
this behavior.
C.Indexes can be compressed for an entire subsystem by setting the IDXCOMP system
parameter to
YES.
D.The default for BIND option DBPROTOCOL can no longer be specified using the system
parameter
DBPROTCL.
E.The amount of work file storage used by any one agent cannot be controlled via system
parameters.
Answer:A D
IBM A2090-737参考書 A2090-737 A2090-737過去問 A2090-737
NO.21 Regarding SVC dumps for the DBM1 address space, what should be reviewed to
determine the DB2
failing component?
A.the GRS summary
B.the LOGREC symptom string
C.the RMM Control Block Analysis
D.the RSM summary
Answer:B
IBM参考書 A2090-737 A2090-737
NO.22 You create a system level point-in-time recovery conditional restart control record with
SYSPITR value
of FFFFFFFFFFFF. Afterwards, you run the RESTORE SYSTEM utility. Which statement is
correct?
A.RESTORE SYSTEM does not do anything, because this SYSPITR value indicates a "no-
operation".
B.The specified LRSN is an IBM internal SYSPITR value, reserved for serviceability only.
C.RESTORE SYSTEM fails because the SYSPITR value is outside the range of valid log
points.
D.The whole DB2 data sharing group is recovered without log truncation.
Answer:D
IBM A2090-737 A2090-737
NO.23 Which two statements are true regarding a traditional image copy disaster recovery in
a data sharing
environment? (Choose two )
A.All members defined to the data sharing group must be restarted at the disaster recovery
site.
B.When using change log inventory (DSNJU003), the latest log record sequence number that
can be
used is the oldest last written log record of all members participating in the restart.
C.Only one conditional restart control record (CRCR) needs to be created for the data
sharing group and
all DB2 members will utilize this CRCR during restart.
D.SETXCF FORCE commands should be used to purge DB2 coupling facility structures prior
to staring
the first DB2 member.
E.The catalog and directory must be recovered by first data sharing member brought up at
the disaster
recovery site and all other members must not be started before this recovery is finished.
Answer:B D
IBM A2090-737 A2090-737 A2090-737問題集 A2090-737認証試験
NO.24 A DASD controller error occurs which results in all of the active logs being marked as
"STOPPED" by
DB2. Which steps should be performed to resolve the log status after the controller error has
been
repaired?
A.1) Stop DB2. 2) Start DB2.
B.1) Stop DB2. 2) REPRO the archive logs to the corresponding active logs. 3) Start DB2.
C.1) Stop DB2. 2) Use DSN1LOGP to make sure last log record written matches the
information in the
BSDS. 3) Do a conditional restart specifying ENDRBA to the highest RBA in the log.
D.1) Use the change log inventory utility (DSNJU003) to delete the active logs from the
BSDS. 2) Use the
change log inventory utility (DSNJU003) to add the active logs back into the BSDS.
Answer:D
IBM A2090-737 A2090-737 A2090-737認定資格
NO.25 In a data sharing system, a system programmer observes very high page p-lock
contention. Which two
actions can they take to reduce this contention? (Choose two.)
A.Reduce row level locking for objects used in high volume transactions.
B.For table spaces defined with LOCKSIZE ANY, use ISOLATION(UR) for high volume query
transactions
using these objects.
C.ALTER heavy used table spaces to use COMPRESS NO.
D.Ensure heavy used indexes are defined with COPY NO.
E.ALTER heavy used table spaces to use TRACKMOD NO.
Answer:A E
IBM認定試験 A2090-737 A2090-737練習問題 A2090-737参考書
NO.26 A customer is performing a traditional image copy disaster recovery test. The systems
programmer
creates a conditional restart control record (CRCR) but detects an error before starting DB2.
Which action
should be performed to correct the CRCR record?
A.First use CRESTART,DELETE to delete the error CRCR record then CRESTART,CREATE
to add a
new one.
B.Start DB2, reply "M" to the WTOR that is displayed from the first CRCR record to modify
the CRCR
parameters.
C.Use CRESTART,MODIFY to modify the parameters of the error CRCR record.
D.Use CRESTART,CREATE to create a new CRCR record.
Answer:D
IBM A2090-737認定証 A2090-737問題集
NO.27 A DB2 subsystem is being migrated/converted from DB2 Version 8 to DB2 9. The
subsystem currently
has these characteristics: new DB2 9 functions are not available; no DB2 9 objects can exist;
the
subsystem cannot fall-back to CM (conversion mode); the subsystem cannot fall-back to
Version 8; the
subsystem cannot coexist with any Version 8 systems in a data sharing group. Which mode
describes the
DB2 subsystem?
A.CM* (conversion mode*)
B.ENFM (enabling-new-function mode)
C.ENFM* (enabling-new-function mode*)
D.NFM (new-function mode)
Answer:B
IBM A2090-737認定試験 A2090-737参考書 A2090-737 A2090-737
NO.28 A customer has just migrated their DB2 system to V9 new function mode. They
currently use the
BACKUP SYSTEM utility and have optionally dumped the backup to tape. Which action
should be
performed to only use the system level backup that was taken to disk?
A.Run the DSNJU003 utility and modify the system point in time backup record to have
DUMPSTATE=NONE.
B.Use the BACKUPTYPE(DASD) keyword on the RESTORE SYSTEM utility.
C.Use the TAPEDUMP(NORECSYS) keyword on the BACKUP SYSTEM utility when the
backup is taken.
D.Set the RESTORE_RECOVER_FROMDUMP system parameter to NO.
Answer:D
IBM認定資格 A2090-737認証試験 A2090-737認定試験 A2090-737認証試験
NO.29 You have to recover your complete DB2 system by image copies and the RECOVER
utility. You start the
recovery with DSNDB01.SYSUTILX and DSNDB01.DBD01. Which table space must be
recovered next?
A.DSNDB01.SPT01
B.DSNDB01.SYSLGRNX
C.DSNDB06.SYSCOPY
D.DSNDB06.SYSDBASE
Answer:C
IBM A2090-737認定証 A2090-737 A2090-737 A2090-737 A2090-737
NO.30 The DB2-supplied SQL Procedure Processor stored procedure DSNTPSMP requires
which two for
execution? (Choose two.)
A.DB2 for z/OS REXX Language Support
B.Workload Manager SPAS with NUMTCB=1
C.Workload Manager SPAS with NUMTCB > 1
D.Optimization Service Center
E.Java Virtual Machine
Answer:A B
IBM A2090-737 A2090-737認定試験 A2090-737
JPexamは最新のC4040-124問題集と高品質のE20-385問題と回答を提供します。JPexamの1z0-457 VCEテストエンジンとC_TFIN22_64試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のCUR-011 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论