JPexamのEW0-100 EW0-200 EW0-300試験参考書はあなたを一回で試験に合格させるだけでなく、EW0-100 EW0-200 EW0-300認定試験に関連する多くの知識を勉強させることもできます。JPexamの問題集はあなたが身に付けるべき技能をすべて含んでいます。そうすると、あなたは自分自身の能力をよく高めることができ、仕事でよりよくそれらを適用することができます。JPexam的EW0-100 EW0-200 EW0-300問題集は絶対あなたがよく試験に準備して、しかも自分を向上させる一番良い選択です。JPexamがあなたに美しい未来を与えることができることを信じてください。
Extreme NetworksのEW0-100 EW0-200 EW0-300認定試験の合格証明書はあなたの仕事の上で更に一歩の昇進で生活条件が向上することが助けられます。Extreme NetworksのEW0-100 EW0-200 EW0-300認定試験はIT専門知識のレベルの検査でJPexamの専門IT専門家があなたのために最高で最も正確なExtreme NetworksのEW0-100 EW0-200 EW0-300試験資料が出来上がりました。JPexamは全面的な最高のExtreme Networks EW0-100 EW0-200 EW0-300試験の資料を含め、きっとあなたの最良の選択だと思います。
JPexamのEW0-100 EW0-200 EW0-300問題集を利用してみたらどうですか。この問題集は最近更新されたもので、実際試験で出題される可能性がある問題をすべて含んでいて、あなたが一回で成功することを保証できますから。この問題集は信じられないほどの良い成果を見せます。試験に失敗すればJPexamは全額返金のことができますから、ご安心に問題集を利用してください。JPexamのEW0-100 EW0-200 EW0-300試験参考書できっとあなたが望ましい成功を取られます。
Extreme NetworksのEW0-100 EW0-200 EW0-300認定試験に受かるためにがんばって勉強していれば、JPexamはあなたにヘルプを与えます。JPexam が提供したExtreme NetworksのEW0-100 EW0-200 EW0-300問題集は実践の検査に合格したもので、最も良い品質であなたがExtreme NetworksのEW0-100 EW0-200 EW0-300認定試験に合格することを保証します。
EW0-100 EW0-200 EW0-300はExtreme Networksの一つ認証試験として、もしExtreme Networks認証試験に合格してIT業界にとても人気があってので、ますます多くの人がEW0-100 EW0-200 EW0-300試験に申し込んで、EW0-100 EW0-200 EW0-300試験は簡単ではなくて、時間とエネルギーがかかって用意しなければなりません。
試験番号：EW0-100問題集
試験科目：Extreme Networks Associate (ENA)
最近更新時間：2014-02-22
問題と解答：全241問
100％の返金保証。1年間の無料アップデート。
試験番号：EW0-200問題集
試験科目：Extreme networks associate(ena)
最近更新時間：2014-02-22
問題と解答：全240問
100％の返金保証。1年間の無料アップデート。
試験番号：EW0-300問題集
試験科目：Extreme Networks Specialist....
最近更新時間：2014-02-22
問題と解答：全158問
100％の返金保証。1年間の無料アップデート。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/EW0-100_exam.html
NO.1 What is the default value for the RIP garbagetime setting?
A. 30 seconds
B. 60 seconds
C. 120 seconds
D. 180 seconds
Answer: C
Extreme Networks EW0-100 EW0-100認定証 EW0-100参考書
NO.2 What is the minimum ExtremeWare software version that supports the Summit48i?
A. ExtremeWare 4.x
B. ExtremeWare 5.x
C. ExtremeWare 6.x
D. None of the above
Answer: C
Extreme Networks過去問 EW0-100 EW0-100 EW0-100問題集
NO.3 VLAN aggregation allows multiple sub-VLANs to share a single IP subnet.
A. True
B. False
Answer: A
Extreme Networks EW0-100認定証 EW0-100過去問 EW0-100過去問 EW0-100
NO.4 Which of the following is not advertised in an OSPF Link State Advertisement?
A. Costs
B. Link utilization
C. Router interfaces
D. Neighbor information
Answer: B
Extreme Networks EW0-100 EW0-100 EW0-100 EW0-100 EW0-100
NO.5 Which ExtremeWare feature permits ESRP to increase the number of protected
VLANs by placing them under the control of a master VLAN?
A. ESRP groups
B. ESRP domains
C. ESRP host attach
D. None of these.
Answer: B
Extreme Networks EW0-100 EW0-100認定試験 EW0-100
NO.6 In RIP, poison reverse means that:
A. A route is not advertised to the interface from which it was learned.
B. A route is advertised as unreachable to the interface from which it was learned.
C. Traffic whose source interface does not match the routing table is blackholed.
D. None of these.
Answer: B
Extreme Networks認定試験 EW0-100 EW0-100認定資格
NO.7 What is the default STP forward delay value?
A. 2 seconds
B. 10 seconds
C. 15 seconds
D. 20 seconds
Answer: C
Extreme Networks過去問 EW0-100認定証 EW0-100認定資格 EW0-100
NO.8 Name a relative route priority that cannot be altered? __________.
Answer: direct
Extreme Networks認定試験 EW0-100問題集 EW0-100 EW0-100
NO.9 If a packet to be forwarded does not match existing flow information in the ASIC
route cache, the packet is queued to the __________ for route processing.
Answer: cpu
Extreme Networks認証試験 EW0-100 EW0-100認証試験 EW0-100
NO.10 Unlike VRRP, the Extreme Standby Router Protocol provides redundancy at both
the data link and network layers.
A. True
B. False
Answer: A
Extreme Networks EW0-100 EW0-100認定証 EW0-100
NO.11 How would you change the password for John Doe's management account?
A. Enter config jdoe and then enter the new password twice.
B. Enter config jdoe user account and then enter the new password twice.
C. Enter config user account jdoe and then enter the new password twice.
D. Enter config account jdoe and then enter the new password twice.
Answer: D
Extreme Networks認証試験 EW0-100 EW0-100 EW0-100
NO.12 Which RIP settings are enabled by default?
A. Triggered updates
B. Poison Reverse
C. Split Horizon
D. Route redistribution
Answer: ABC
Extreme Networks問題集 EW0-100 EW0-100 EW0-100
NO.13 How do you disable Split Horizon?
A. disable rip splithorizon noadvertise
B. unconfig rip splithorizon
C. disable rip splithorizon
D. unconfig rip splithorizon noadvertise
Answer: C
Extreme Networks問題集 EW0-100過去問 EW0-100認定証 EW0-100練習問題
NO.14 QoS policy is applied _____ in an Extreme switch.
A. per port
B. per queue, per port
C. per queue
D. None of these.
Answer: B
Extreme Networks EW0-100 EW0-100過去問 EW0-100 EW0-100認証試験
NO.15 All OSPF routers in the same area must have the same LSDB.
A. True
B. False
Answer: A
Extreme Networks EW0-100認定試験 EW0-100 EW0-100認定資格
NO.16 Without QoS, all packets are allowed equal access to an egress port.
A. True
B. False
Answer: A
Extreme Networks過去問 EW0-100問題集 EW0-100 EW0-100
NO.17 SNMP access to ExtremeWare can be limited by the following methods:
A. Use an access list
B. Use an access profile
C. Use the disable snmp access command
D. None of these
Answer: ABC
Extreme Networks認定資格 EW0-100 EW0-100問題集 EW0-100認定資格
NO.18 RIP version 2 uses a composite metric that includes link speed and delay.
A. True
B. False
Answer: B
Extreme Networks練習問題 EW0-100 EW0-100認定資格 EW0-100過去問 EW0-100
NO.19 When using Spanning Tree Protocol, ExtremeWare permits VLANs in different
STPDs to share the same port when tagged.
A. True
B. False
Answer: B
Extreme Networks EW0-100練習問題 EW0-100過去問
NO.20 Which command would you use to configure VLAN corporate with IP address
192.168.0.1/16?
A. config vlan corporate ipaddress 192.168.0.1/16
B. config ipaddress corporate vlan 192.168.0.1/16
C. config ipaddress 192.168.0.1/16 vlan corporate
D. config ipaddress 192.168.0.1/16 corporate vlan
Answer: A
Extreme Networks参考書 EW0-100認証試験 EW0-100認定証 EW0-100問題集
NO.21 Which command would you use to configure VLAN CORPORATE (tag 100) with
ports 1:1 through 4:8 tagged and ports 5:1 through 8:8 as untagged?
A. config vlan corporate ports add 1:1-4:8 tagged ¨¤ config vlan corporate ports add
5:1-8:8 untagged
B. config vlan corporate add ports1:1-4:8 tagged ¨¤ config vlan corporate add ports
5:1-8:8 untagged
C. config corporate vlan add ports 1:1-4-8 tagged ¨¤ config corporate vlan add ports
5:1-8:8 untagged
D. config corporate vlan ports add 1:1-4:8 tagged ¨¤ config corporate vlan ports add
5:1:8:8 untagged
Answer: B
Extreme Networks練習問題 EW0-100 EW0-100 EW0-100 EW0-100認定証 EW0-100
NO.22 Exhibit:
Given this display, how would you find information similar to the SHOW SWITCH
command?
A. Click on STATISTICS, then SHOW, then SWITCH.
B. Click on STATISTICS, then SWITCH, then SHOW.
C. Click on STATISTICS, then SHOW.
D. Click on STATISTICS, then SWITCH.
Answer: D
Extreme Networks参考書 EW0-100過去問 EW0-100 EW0-100
NO.23 Given router interfaces 10.0.0.1/24, 10.10.10.10/24, 192.168.0.1/24, and
192.168.255.254/24 on a Summit7i switch what will be the OSPF router ID given the
following command: config ospf routerid automatic?
A. 10.0.0.1/24
B. 10.10.10.10/24
C. 192.168.0.1/24
D. 192.168.255.254/24
Answer: D
Extreme Networks認定資格 EW0-100参考書 EW0-100参考書 EW0-100練習問題 EW0-100 EW0-100
NO.24 __________ allow(s) multiple VLANs to be controlled by a single ESRP instance.
A. ESRP domains
B. ESRP groups
C. ESRP host-attach
D. None of these.
Answer: A
Extreme Networks過去問 EW0-100 EW0-100
NO.25 Which of the following routes will be used to forward a frame to 192.168.1.174?
A. 192.168.1.0/29
B. 192.168.1.128/30
C. 192.168.1.128/25
D. None of these.
Answer: C
Extreme Networks過去問 EW0-100認定資格 EW0-100 EW0-100問題集 EW0-100参考書
NO.26 Internal routers within an OSPF area are either DRs, BDRs, or __________.
Answer: ODR
Extreme Networks練習問題 EW0-100 EW0-100 EW0-100認定試験
NO.27 What type of area is used to limit external routes?
A. Stub area
B. Normal area
C. Backbone area
D. None of these
Answer: A
Extreme Networks過去問 EW0-100認定資格 EW0-100問題集 EW0-100 EW0-100練習問題 EW0-100過去問
NO.28 A VLAN can be a member of up to 64 STPDs.
A. True
B. False
Answer: B
Extreme Networks参考書 EW0-100 EW0-100 EW0-100 EW0-100
NO.29 STPDs s0, s1, and s2 have been created. How would you activate only s1 while
leaving the other STPDs inactive?
A. enable stpd s1
B. enable s1 stpd
C. enable stp ¨¤ enable s1 stpd
D. None of these
Answer: A
Extreme Networks EW0-100認定証 EW0-100練習問題 EW0-100認証試験
NO.30 Extreme Networks "I" series switches have this many queues per port. __________.
Answer: 8
没有评论:
发表评论