2014年2月19日星期三

楽にJuniper JN0-331認定試験の準備を完了したい?

JPexamの問題集はIT専門家がJuniperのJN0-331認証試験について自分の知識と経験を利用して研究したものでございます。JPexamの問題集は真実試験の問題にとても似ていて、弊社のチームは自分の商品が自信を持っています。JPexamが提供した商品をご利用してください。もし失敗したら、全額で返金を保証いたします。

JuniperのJN0-331試験に合格することは容易なことではなくて、良い訓練ツールは成功の保証でJPexamは君の試験の問題を準備してしまいました。君の初めての合格を目標にします。

JPexamのJN0-331問題集の超低い価格に反して、 JPexamに提供される問題集は最高の品質を持っています。そして、もっと重要なのは、JPexamは質の高いサービスを提供します。望ましい問題集を支払うと、あなたはすぐにそれを得ることができます。JPexamのサイトはあなたが最も必要なもの、しかもあなたに最適な試験参考書を持っています。JN0-331問題集を購入してから、また一年間の無料更新サービスを得ることもできます。一年以内に、あなたが持っている資料を更新したい限り、JPexamは最新バージョンのJN0-331問題集を捧げます。JPexamはあなたに最大の利便性を与えるために全力を尽くしています。

JPexamはIT試験問題集を提供するウエブダイトで、ここによく分かります。最もよくて最新で資料を提供いたします。こうして、君は安心で試験の準備を行ってください。弊社の資料を使って、100%に合格を保証いたします。

JPexamのJuniperのJN0-331認証試験について最新な研究を完成いたしました。無料な部分ダウンロードしてください。きっと君に失望させないと信じています。最新JuniperのJN0-331認定試験は真実の試験問題にもっとも近くて比較的に全面的でございます。

試験番号:JN0-331問題集
試験科目:SEC,Specialist(JNCIS-SEC)
最近更新時間:2014-02-19
問題と解答:全131問
100%の返金保証。1年間の無料アップデート。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.jpexam.com/JN0-331_exam.html

NO.1 Which two statements describe the difference between JUNOS Software for security platforms and a
traditional router? (Choose two.)
A. JUNOS Software for security platforms supports NAT and PAT; a traditional router does not support
NAT or PAT.
B. JUNOS Software for security platforms does not forward traffic by default; a traditional router forwards
traffic by default.
C. JUNOS Software for security platforms uses session-based forwarding; a traditional router uses
packet-based forwarding.
D. JUNOS Software for security platforms performs route lookup for every packet; a traditional router
performs route lookup only for the first packet.
Answer: BC

Juniper認証試験   JN0-331認定資格   JN0-331参考書   JN0-331

NO.2 Which two statements are true regarding proxy ARP? (Choose two.)
A. Proxy ARP is enabled by default.
B. Proxy ARP is not enabled by default.
C. JUNOS security devices can forward ARP requests to a remote device when proxy ARP is enabled.
D. JUNOS security devices can reply to ARP requests intended for a remote device when proxy ARP is
enabled.
Answer: BD

Juniper認定試験   JN0-331   JN0-331   JN0-331参考書   JN0-331過去問   JN0-331認定証

NO.3 Regarding attacks, which statement is correct?
A. Both DoS and propagation attacks exploit and take control of all unprotected network devices.
B. Propagation attacks focus on suspicious packet formation using the DoS SYN-ACK-ACK proxy flood.
C. DoS attacks are directed at the network protection devices, while propagation attacks are directed at
the servers.
D. DoS attacks are exploits in nature, while propagation attacks use trust relationships to take control of
the devices.
Answer: D

Juniper   JN0-331認定試験   JN0-331   JN0-331   JN0-331認証試験

NO.4 Host A opens a Telnet connection to Host B. Host A then opens another Telnet connection to Host B.
These connections are the only communication between Host A and Host B. The security policy
configuration permits both connections.
How many flows exist between Host A and Host B?
A. 1
B. 2
C. 3
D. 4
Answer: D

Juniper   JN0-331   JN0-331   JN0-331   JN0-331

NO.5 For IKE phase 1 negotiations, when is aggressive mode typically used?
A. when one of the tunnel peers has a dynamic IP address
B. when one of the tunnel peers wants to force main mode to be used
C. when fragmentation of the IKE packet is required between the two peers
D. when one of the tunnel peers wants to specify a different phase 1 proposal
Answer: A

Juniper認定試験   JN0-331過去問   JN0-331   JN0-331   JN0-331認定資格

NO.6 Click the Exhibit button.
[edit schedulers]
user@host# show
scheduler now {
monday all-day;
tuesday exclude;
wednesday {
start-time 07:00:00 stop-time 18:00:00;
}
thursday {
start-time 07:00:00 stop-time 18:00:00;
}
}
[edit security policies from-zone Private to-zone External]
user@host# show
policy allowTransit {
match {
source-address PrivateHosts;
destination-address ExtServers;
application ExtApps;
}
then {
permit {
tunnel {
ipsec-vpn myTunnel;
}
}
}
scheduler-name now;
Based on the configuration shown in the exhibit, what are the actions of the security policy?
A. The policy will always permit transit packets and use the IPsec VPN myTunnel.
B. The policy will permit transit packets only on Monday, and use the IPsec VPN Mytunnel.
C. The policy will permit transit packets and use the IPsec VPN myTunnel all day Monday and
Wednesday 7am to 6pm, and Thursday 7am to 6pm.
D. The policy will always permit transit packets, but will only use the IPsec VPN myTunnel all day Monday
and Wednesday 7am to 6pm, and Thursday 7am to 6pm.
Answer: C

Juniper   JN0-331認証試験   JN0-331   JN0-331練習問題

NO.7 Regarding zone types, which statement is true?
A. You cannot assign an interface to a functional zone.
B. You can specifiy a functional zone in a security policy.
C. Security zones must have a scheduler applied.
D. You can use a security zone for traffic destined for the device itself.
Answer: D

Juniper   JN0-331練習問題   JN0-331参考書   JN0-331   JN0-331   JN0-331認定試験

NO.8 Users can define policy to control traffic flow between which two components? (Choose two.)
A. from a zone to the device itself
B. from a zone to the same zone
C. from a zone to a different zone
D. from one interface to another interface
Answer: BC

Juniper認証試験   JN0-331認証試験   JN0-331認定試験

NO.9 Click the Exhibit button.
[edit groups]
user@host# show
node0 {
system {
host-name NODE0;
}
interfaces {
fxp0 {
unit 0 {
family inet {
address 1.1.1.1/24;
}
}
}
}
}
node1 {
system {
host-name NODE1;
}
interfaces {
fxp0 {
unit 0 {
family inet {
address 1.1.1.2/24;
}
}
}
}
}
In the exhibit, what is the function of the configuration statements?
A. This section is where you define all chassis clustering configuration.
B. This configuration is required for members of a chassis cluster to talk to each other.
C. You can apply this configuration in the chassis cluster to make configuration easier.
D. This section is where unique node configuration is applied.
Answer: D

Juniper練習問題   JN0-331練習問題   JN0-331認証試験   JN0-331過去問

NO.10 In JUNOS Software, which three packet elements can be inspected to determine if a session already
exists? (Choose three.)
A. IP protocol
B. IP time-to-live
C. source and destination IP address
D. source and destination MAC address
E. source and destination TCP/UDP port
Answer: ACE

Juniper   JN0-331問題集   JN0-331練習問題   JN0-331認定資格   JN0-331   JN0-331

NO.11 Which three functions are provided by JUNOS Software for security platforms? (Choose three.)
A. VPN establishment
B. stateful ARP lookups
C. Dynamic ARP inspection
D. Network Address Translation
E. inspection of packets at higher levels (Layer 4 and above)
Answer: ADE

Juniper認証試験   JN0-331   JN0-331過去問

NO.12 Which two configurations are valid? (Choose two.)
A. [edit security zones]
user@host# show
security-zone red {
interfaces {
ge-0/0/1.0;
ge-0/0/3.0;
}
}
security-zone blue {
interfaces {
ge-0/0/2.0;
ge-0/0/3.102;
}
}
B. [edit security zones]
user@host# show
security-zone red {
interfaces {
ge-0/0/1.0;
ge-0/0/2.0;
}
}
security-zone blue {
interfaces {
ge-0/0/1.0;
ge-0/0/3.0;
}
}
C. [edit routing-instances]
user@host# show
red {
interface ge-0/0/3.0;
interface ge-0/0/2.102;
}
blue {
interface ge-0/0/0.0;
interface ge-0/0/3.0;
}
D. [edit routing-instances]
user@host# show
red {
interface ge-0/0/3.0;
interface ge-0/0/3.102;
}
blue {
interface ge-0/0/0.0;
interface ge-0/0/2.0;
}
Answer: AD

Juniper   JN0-331   JN0-331   JN0-331認定証   JN0-331問題集

NO.13 By default, which condition would cause a session to be removed from the session table?
A. Route entry for the session changed.
B. Security policy for the session changed.
C. The ARP table entry for the source IP address timed out.
D. No traffic matched the session during the timeout period.
Answer: D

Juniper過去問   JN0-331   JN0-331参考書

NO.14 What is the default session timeout for UDP sessions?
A. 30 seconds
B. 1 minute
C. 5 minutes
D. 30 minutes
Answer: C

Juniper参考書   JN0-331   JN0-331   JN0-331

NO.15 Which two statements describe the difference between JUNOS Software for security platforms and a
traditional router? (Choose two.)
A. JUNOS Software for security platforms supports NAT and PAT; a traditional router does not support
NAT or PAT.
B. JUNOS Software for security platforms secures traffic by default; a traditional router does not secure
traffic by default.
C. JUNOS Software for security platforms allows for session-based forwarding; a traditional router uses
packet-based forwarding.
D. JUNOS Software for security platforms separates broadcast domains; a traditional router does not
separate broadcast domains.
Answer: BC

Juniper   JN0-331過去問   JN0-331認定資格   JN0-331   JN0-331

NO.16 Which two statements about JUNOS Software packet handling are correct? (Choose two.)
A. JUNOS Software applies service ALGs only for the first packet of a flow.
B. JUNOS Software uses fast-path processing only for the first packet of a flow.
C. JUNOS Software performs route and policy lookup only for the first packet of a flow.
D. JUNOS Software applies SCREEN options for both first and consecutive packets of a flow.
Answer: CD

Juniper問題集   JN0-331   JN0-331

NO.17 What is the purpose of a zone in JUNOS Software?
A. A zone defines a group of security devices with a common management.
B. A zone defines the geographic region in which the security device is deployed.
C. A zone defines a group of network segments with similar security requirements.
D. A zone defines a group of network segments with similar class-of-service requirements.
Answer: C

Juniper   JN0-331認定証   JN0-331   JN0-331

NO.18 What are two components of the JUNOS Software architecture? (Choose two.)
A. Linux kernel
B. routing protocol daemon
C. session-based forwarding module
D. separate routing and security planes
Answer: BC

Juniper   JN0-331   JN0-331   JN0-331練習問題   JN0-331問題集   JN0-331過去問

NO.19 A traditional router is better suited than a firewall device for which function?
A. VPN establishment
B. packet-based forwarding
C. stateful packet processing
D. Network Address Translation
Answer: B

Juniper過去問   JN0-331練習問題   JN0-331

NO.20 Which two functions of JUNOS Software are handled by the data plane? (Choose two.)
A. NAT
B. OSPF
C. SNMP
D. SCREEN options
Answer: AD

Juniper参考書   JN0-331問題集   JN0-331認定資格   JN0-331

JPexamは最新のIIA-CIA-Part2問題集と高品質のHH0-240問題と回答を提供します。JPexamの000-129 VCEテストエンジンと000-502試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の000-784 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク:http://www.jpexam.com/JN0-331_exam.html

没有评论:

发表评论